Emulsion RS-1

Tack coat application

Emulsion RS 1 is specially designed water based Bitumen Emulsion with low viscosity and fast setting time that makes it an ideal product for spray application. It is chocolate brown in colour and is a free flowing liquid at ambient temperature.

# Properties Emulsion RS-1
1 Residue on 600 Micron Is Sieve, % Max 0.05
2 Viscosity @ 50˚C (Saybolt Viscometer ), sec 20-100
 3 Storage Stability after 24 Hour, % Less than 2
 4 Binder Residue By Evaporation, % Min 60
 5 Average Setting time, Minutes – 15

Emulsion RS-2

Surface Dressing application, Grouting, Penetration Mecadam, Sand Seal.

Emulsion RS 2 is specially designed water based Bitumen Emulsion with high viscosity and fast setting time that makes it an ideal spraying product for road maintenance. It is chocolate brown in colour and is a free flowing liquid at ambient temperature.

# Properties Emulsion RS-1
1 Residue on 600 Micron Is Sieve, % Max 0.05
2 Viscosity @ 50˚C (Saybolt Viscometer ), sec 100-300
 3 Storage Stability after 24 Hour, % Less than 1
 4 Binder Residue By Evaporation, % Min 67
 5 Coagulation at Low Temperature Nil

Emulsion MS

Pot holes repairs/patch work; 20mm premix carpet.

Emulsion MS is specially designed water based Bitumen Emulsion with moderate viscosity and setting time.The medium range of time makes it an ideal product for premixing applications. It is chocolate brown in colour and is a free flowing liquid at ambient temperature.

# Properties Emulsion RS-1
1 Residue on 600 Micron Is Sieve, % Max 0.05
2 Viscosity @ 50˚C (Saybolt Viscometer ), sec 50-300
 3 Setting Time, Minutes 30
 4 Binder Residue By Evaporation, % Min 65
 5 Coagulation at Low Temperature Nil

Emulsion SS-1 IS

Prime coat Application

Emulsion SS 1 is specially designed oil based Bitumen Emulsion with low viscosity, and extended setting time and stability with cement that time makes it an ideal product for Prime Cost applications. It is  black in colour and is a free flowing liquid at ambient temperature.

# Properties Emulsion RS-1
1 Residue on 600 Micron Is Sieve, % Max 0.05
2 Viscosity @ 25˚C (Saybolt Viscometer ), sec 20-100
 3 Setting Time, Hrs Less than 48
 4 Binder Residue By Distillation, % Min 50
 5 Coagulation at Low Temperature Nil

Emulsion SS-1 ASTM

Prime coat Application

Bituminous emulsion is a liquid form of bitumen in which a substantial amount of bitumen is suspended in finely divided condition in aqueous medium; bitumen is the dispersed phase and water is the continuous phase. Bitumen emulation is designed to exceed the functional requirements of respective applications.

# Properties Emulsion RS-1
1 Residue on 600 Micron Is Sieve, % Max 0.10
2 Viscosity @ 25˚C (Saybolt Viscometer ), sec 20-100
 3 Storage Stability, % Max Less than 1
 4 Binder Residue By Distillation, % Min 57
 5 Cement Mixing Test, % Max Less than 2

Emulsion SS2

Fog Seal; Crack seal, Slurry Seals, Premix Seal Coat.

Emulsion SS 2 is specially designed water based Bitumen Emulsion with low viscosity and extended setting time that makes it an ideal product for road maintenance applications. It is chocolate brown in colour and is a free flowing liquid at ambient temperature.

# Properties Emulsion RS-1
1 Residue on 600 Micron Is Sieve, % Max 0.05
2 Viscosity @ 25˚C (Saybolt Viscometer ), sec 30-150
 3 Setting Time, Hrs Less than 60
 4 Binder Residue By Evaporation, % Min 60
 5 Coagulation at Low Temperature Nil
 6 Storage Stability, % Max Less than 2

K2 Emulsion

Prime Coat.

Key features:

  • Cationic medium setting emulsion as per british standards
  • Suitable for premix – carpet and pothole repair

Advantages:

  • Environmental friendly and economical
  • Ease of application
  • Resists stripping